Engines

Oil system

What does revitalization of engines provide?

    • Removes ovality and taper on working surface of cylinders up to 0.15 mm
    • Fully eliminates scratches and microscuffs on working surfaces of cylinders with the depth up to 0.03 mm
    • Guarantees protection against wear during the year by any operation mode
    • Levels and increases compression and maximum combustion pressure in cylinders
    • Saves up to 18% of fuel
    • Increases engine power
    • Ensures engine operation at emergency oil leak up to 300 km of run
    • Decreases CO and HC in exhaust gases by 2-10 times
    • Increases service life by 1.5-2.5 times

    Application:

    Diesel engines with oil system capacity of more than 30 L are treated with XADO Gel-revitalizant for diesel engines in 3 stages in the amount of 0.9 ml to 1 L of operational oil for one treatment stage.

    Diesel or gasoline engines with oil system capacity of less than 30 L are treated with XADO Gel-revitalizant for diesel engines or XADO Gel-revitalizant for gasoline engines in three stages (for every engine type correspondingly).

    Engine oil system capacity, L Amount of tubes (of 9.0 ml) or aerosol cans (of 10.0 ml) of XADO gel-revitalizant for diesel/gasoline engines, pcs Treatment scheme per stages
    3-10 3 1+1+1
    11-20 6 2+2+2
    21-30 9 3+3+3

     

    Accumulated operational time between stages comprises 8-12 hours or 150-250 km of run;

    Full treatment cycle makes not less than 400 hours of accumulated operational time or not less than 1,500 km of run from the beginning of the first treatment stage.

    Fuel system

    What does revitalization of engines provide?

      • Eliminates wear in pump elements up to 0.003 mm
      • reliably protects high pressure fuel pump against low-quality fuel
      • Improves spray pattern
      • increases pressure and injection rate of fuel in cylinders
      • reduces fuel consumption up to 7%
      • decreases CO and HC in exhaust gases by 2-10 times
      • prolongs service life of high pressure fuel pump by 2-3 times

      Application:

      Treatment of fuel systems is completed with XADO Gel-revitalizant for fuel equipment (for diesel and gasoline engines correspondingly) in one stage by introduction of the necessary amount of the gel into fuel according to the above table;

      Full treatment cycle makes not less 80 operating hours of engines or 4,000 km of run.

       

      Engine capacity, L Amount of tubes (9.0 ml) or aerosol cans (10.0 ml) of XADO gel-revitalizant for high pressure fuel pumps per fuel tank
      Less 5 1
      5-15 2
      15-30 3
      30-75 4
      75-100 5
      100-140 6
      140-175 7
      175-200 8
      200-225 9
      225-260 10
      260-300 11